What are the steps to replace excavator parts

How to replace the parts of an excavator
1.Sealant should be used as much as possible. If necessary, painting can be applied to achieve the ideal sealing effect.

2.Before assembling the rubber sealing ring, the appearance quality should be carefully inspected. They must be pressed with special tools to avoid deformation due to impact.

3. Add grease as prescribed and clean the exhaust holes and check valves regularly.

4. Assemble under very clean conditions. Keep the working surface of the parts free from collisions, scratches, burrs and other attachments.

Strict operation rules and correct sealing installation are necessary to prevent deformation caused by improper installation.